For years there seemed to be one trustworthy way for you to store info on a pc – by using a hard disk drive (HDD). On the other hand, this kind of technology is currently demonstrating its age – hard disk drives are loud and sluggish; they’re power–hungry and frequently create lots of warmth in the course of intensive operations.
SSD drives, alternatively, are fast, use up far less energy and are also much cooler. They feature an exciting new strategy to file access and storage and are years ahead of HDDs relating to file read/write speed, I/O operation as well as power efficiency. Observe how HDDs fare up against the more recent SSD drives.
1. Access Time
SSD drives provide a fresh & impressive method of file safe–keeping using the utilization of electronic interfaces as an alternative to just about any moving parts and spinning disks. This new technology is considerably quicker, allowing for a 0.1 millisecond file access time.
HDD drives count on spinning disks for files storage reasons. Each time a file is being used, you need to wait for the appropriate disk to reach the appropriate position for the laser to reach the file you want. This leads to a standard access rate of 5 to 8 milliseconds.
2. Random I/O Performance
The random I/O performance is important for the performance of any file storage device. We have executed substantial assessments and have determined an SSD can deal with at the very least 6000 IO’s per second.
With a HDD drive, the I/O performance steadily increases the more you use the hard drive. Nevertheless, in the past it actually reaches a particular cap, it can’t get quicker. And due to the now–old technology, that I/O limitation is much lower than what you can receive with an SSD.
HDD are only able to go so far as 400 IO’s per second.
3. Reliability
SSD drives don’t have virtually any moving parts, which means that there’s far less machinery included. And the fewer actually moving components you will find, the fewer the likelihood of failure are going to be.
The average rate of failure of an SSD drive is 0.5%.
With an HDD drive to work, it has to rotate a couple of metal hard disks at a minimum of 7200 rpm, keeping them magnetically stabilized in the air. They have a lots of moving components, motors, magnets and other gadgets jammed in a tiny location. Hence it’s obvious why the standard rate of failure of any HDD drive varies in between 2% and 5%.
4. Energy Conservation
SSDs do not have moving elements and require minimal cooling energy. They also involve not much electricity to operate – trials have indicated they can be powered by a common AA battery.
As a whole, SSDs use up amongst 2 and 5 watts.
From the moment they were built, HDDs have been very energy–hungry devices. So when you have a server with lots of HDD drives, this can raise the per month utility bill.
Normally, HDDs use up in between 6 and 15 watts.
5. CPU Power
SSD drives enable swifter data accessibility rates, which will, subsequently, encourage the processor to complete data queries much quicker and after that to return to other duties.
The average I/O hold out for SSD drives is just 1%.
By using an HDD, you have to spend more time waiting around for the outcome of one’s data call. This means that the CPU will remain idle for further time, looking forward to the HDD to respond.
The normal I/O wait for HDD drives is about 7%.
6.Input/Output Request Times
Almost all of My Duo Servers’s new web servers are now using exclusively SSD drives. Our very own tests have established that using an SSD, the normal service time for an I/O request while running a backup stays under 20 ms.
During the exact same tests sticking with the same hosting server, this time around equipped out utilizing HDDs, general performance was considerably slower. All through the hosting server backup procedure, the common service time for I/O calls varied between 400 and 500 ms.
7. Backup Rates
Another real–life advancement will be the speed with which the back up is created. With SSDs, a server data backup today can take only 6 hours using our web server–designed software solutions.
Over the years, we have got employed primarily HDD drives on our web servers and we’re well aware of their overall performance. On a hosting server loaded with HDD drives, an entire web server backup typically takes around 20 to 24 hours.
Should you wish to straight away boost the functionality of one’s websites without the need to adjust just about any code, an SSD–powered hosting solution will be a very good solution. Take a look at the Linux website hosting packages – our solutions include swift SSD drives and are available at good prices.
Hepsia
- Live Demo
Service guarantees
- Each of our Virtual Private Servers is setup for you absolutely free. 99.9% network uptime. Full SSH/full root access.
Compare our prices
- Examine the tools and features coming with our Virtual Private Servers. You can start off with a smaller VPS server and upgrade with only a click as your needs grow.
- Compare our hosting plans
Contact Us
- Contact us 24/7 by email or by using our extremely–fast ticketing system. Our techs are going to reply to all of your requests within 1 hour.